|
青山学院大学理工学部 機械創造工学科 超音波光学研究室 |
|
Ultrasonic and Optical Engineering Laboratory |
|
主な研究業績 |
国際会議 |
|
1)T.Hayano, T.Matsuo, H.Cho and M.Takemoto, “Heat resistant optical fiber system for AE monitoring in a high temperature vacuum chamber”, Advances in AE”, pp.28-33,(2007-10)Lake Tahoe, USA 2)T.Matsuo, H.Cho T.Ogawa and M.Takemoto, “Optical fiber AE sensor for blockage monitoring of water pipes of power generation plant”, Advances in AE”, pp.40-45,(2007-10)Lake Tahoe, USA 3)T.Matsuo, H.Cho, T.Ogawa and M.Takemoto, “Immersion type quadridirectional optical fiber AE sensor for liquid-borne AE”, Advances in AE”, pp.34-39,(2007-10)Lake Tahoe, USA 4)H.Cho and M.Takemoto, “Film-type PZT sensor as AE sensor and active guided wave transducer” Advances in AE”, pp.22-27,(2007-10)Lake Tahoe, USA 5)H.Cho and M.Takemoto, “Hydrogen related brittle cracking of metastable type-304 stainless steel” Advances in AE”, pp.360-365,(2007-10)Lake Tahoe, USA 6)Y.Taniyama, H.Cho, M.Takemoto and G.Nakayama, “Characterization of titanium hydrides using a hybrid technique of AE and FEM during indentation test” Advances in AE”, pp.366-371,(2007-10)Lake Tahoe, USA 7)T.Matsuo, H.Cho, M.Kado and I.Katsuyama, “Monitoring of Blockages by Shellfishes in a Pipe Utilizing an Optical Fiber Acoustic Emission System”, 14th International Congress on Marine Corrosion and Fouling, Kobe Japan, July 2008 8) H.Cho, T.Abe and T.Matsuo，“QUANTITATIVE EVALUATION OF THE BLOCKING RATIO OF A BLOCKAGE INSIDE A PIPE UTILIZING FILM-TYPE PZT ELEMENTS”，The 3rd JSME/ASME International Conference on Material and Processing，Illinois USA，October 2008 9) T.Matsuo and H.Cho, “Corrosion monitoring by Acoustic emission technique -Development of an optical fiber AE system and its application to corrosion detection-”, 4th International Workshop on Risk Based Engineering, pp.267-272, Tokyo Japan, November 2008 10) T.Matsuo, Y.Mizuno and H.Cho, “Blockage Monitoring of Pipes by Shellfishes Utilizing an Optical Fiber AE System”, The 19th International Acoustic Emission Symposium, Kyoto，Japan, December 2008 11)H.Cho,Y.Tamura and T.Matsuo “Monitoring of Corrosion Under Insulation by Measuring of Acoustic Emission and Humility”, The 19th International Acoustic Emission Symposium, Kyoto，Japan, December 2008 12) T.Matsuo and H.Cho. “Development of AE monitoring system with noise reduction function by spectral subtraction”, The 13th Asia Pacific Conference on Non-Destructive Testing, Yokohama Japan, November November 2009. 13) Y.Takayama, H.Cho and T.Matsuo, “Development of phase and polarization compensated optical fiber acoustic emission monitoring system and its application”,The 13th Asia Pacific Conference on Non-Destructive Testing, Yokohama Japan, November November 2009. 14) T.Matsuo and H.Cho, “An Advanced Acoustic Emission Monitoring System utilizing a Hybrid Technique from an Optical Fiber AE System and Real-Time Noise Reduction Function”, The Fourth Japan-US symposium on Emerging NDE Capabilities for a Safer World, Hawaii USA, June 2010, pp.155-160 15) H.Cho, H.Hariu and T.Matsuo, “AE monitoring for intergranular-type stress corrosion cracking of sensitized AISI 304 steel induced by polythionic acid”, 20th International Acoustic Emission Symposium, Kumamoto Japan, November 2010, pp.295-300 16) T.Matsuo, M.Uchida and H.Cho, “Damage detection of graphite electrode in lithium ion battery by acoustic emission”, 20th International Acoustic Emission Symposium, Kumamoto Japan, November 2010, pp.301-306 17) Y.Takayama, H.Cho and T.Matsuo, “Measurement of Acoustic Emission (AE) in High-Temperature Environment Using Optical Fiber AE Monitoring System”, International Conference On Experimental Mechanics 2010, KualaLumpur Malaysia, Novemver 2010, pp.113 1-6(CD-ROM) 18) H.Cho, N.Yamada and T.Matsuo, “Evaluation of surface pressure of flange connection by second harmonic waves”, International Conference On Experimental Mechanics 2010, KualaLumpur Malaysia, Novemver 2010, pp.61 1-6(CD-ROM) 19) T.Matsuo, M.Uchida and H.Cho, “Development of Acoustic Emission Clustering Method to Detect Degradation of Lithium Ion Batteries”, JSME/ASME 2011 International Conference on Materials and Processing, USA, June 2011, ICMP-51103 pp.1-7(CD-ROM) |
